











Cut an 85mm (3 3/8") hole in the panel and provide 70mm (2 3/4”) clearance behind the panel to fit the gauge properly. Once the hole is ready, insert the gauge into the opening.
To secure the GPS antenna, mount it in a flat position with the black side facing up. Ideally, place it outside or on the inside front windscreen for a better view of the sky. Connect the antenna cable to the socket at the back of the gauge. Avoid cutting the cable as it may affect performance.
First time signal acquisition typically takes about 30 seconds, but subsequent acquisitions usually take less than 3 seconds, especially with a clear view of the sky. If you experience signal loss, try reconnecting all wires and restarting the device.
The gauge displays the current speed and an odometer (which cannot be reset). If you need a trip meter too, consider the ASINs B07KPHDFDB, B07KPHC1ML, or B07KPG7XT3.
This device operates on 9-32VDC (12VDC/24VDC) with a red backlight for easy visibility.
